|
Kiosk Branding
Logo/Branding instructions for the friendlyway Classic IIS
|
#1
Upper logo area 9"W x 6"H.
Note: friendlyway logo is etched into surface, approx. 2" dia., centered 2.75" from top - any covering decal must have solid background.
|
#2
Middle logo area 16"W x 4"H
|
#3
Lower logo area 16"W x 32"H
|
- All branding must be accomplished with 0.003" die-cut pressure sensitive adhesive backed vinyl.
- Terminal surface must be mechanically and chemically clean to accept decals.
- Determine proposed location and position of decal prior to attempting installation - any attempt at relocation is likely to damage decal.
- Decals should be installed by peeling the backing loose at one end; anchoring that end squarely, then gradually exposing and spreading the decal onto the terminal surface (using a flexible straight edge) while incrementally removing the backing paper from the other side.
| Artwork used for branding kiosks must be provided according to the following specifications:
Adobe Illustrator vector art files
All text converted to outlines
Files saved in Illustrator EPS
Instructions for each individual image must include :
- Color from PMS selector or other recognized standard.
- Size of final decal.
- Orientation; vertical or horizontal.
- Position relative to a fixed reference point (such as “lower right corner of monitor”).
Files should be sent via email OR by CD
Please do not use PageMaker files
Please send all artwork files to your Account Manager. If you have any questions or concerns, please do not hesitate to contact your representative.
Please have all artwork delivered 5 business days prior to scheduled shipment.
|
|
|
